- 3D forged 2014 aluminum alloy with oversized box cross-section - Oversize 46mm wide 6061 alloy faceplate - Steel hardware - ± 8° rise requires fewer spacers - 1-1/8" steerer adapter included
Ritchey's Adjustable Road Stem is a super-versatile stem ready for any riding style. The angle can be adjusted from plus-45 degrees to negative-45 degrees and anywhere in-between, allowing you to fine-tune the exact bar placement you're looking for whether you want to get down into a super-aero position or sit up in a back-friendly upright position. Plus, it's made of forged aluminum for light weight and excellent durability.
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
Electra's Cruiser Aluminum Stem is a stable, solid replacement for your original equipment. Designed to work with a 1-inch headset, the Cruiser Stem is made from no-frills aluminum that keeps off the weight while maintaining strength where you need it.
Dimension 26.0 Stems - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Fully forged AL-6061-T6 - 4-bolt handlebar clamp - Weight: 140g-180g
Make sure your fit is dialed in your race against the clock! Bontrager's Speed Concept Stem allows you to set up your Speed Concept bike for proper ergonomics and aerodynamics. Plus, the precisely integrated design keeps your super aero bike fast and looking pro! - Low-Near = 17° rise / 77mm length - Low-Far = 100° rise / 110mm length - Mid-Near = 50° rise / 67mm length - Mid-Far = 45° rise / 110mm length - High-Near = 80° rise / 67mm length - High-Far = 75° rise / 110mm length
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 35mm - Stem Angle: -84 deg , +96 deg
Designed for use with Cannondale's Headshok (sold separately), the Headshok Stem is tough, light, and ready to ride. - Sleek styling with maximum strength and stiffness - Forged from a single block of lightweight 2024 aluminum with our patented OPI 3D forging process, these stems are exceptionally light and strong - 31.8mm clamp interface - Weight: 185 grams (100mm length)
Cannondale's 1.5-inch Stem comes in plenty of options to fine-tune the fit on your bike. This stem works with larger 1.5-inch steerers, frequently found on Cannondale's front-suspension bikes. Using Cannondale's One-Piece-Integration process, it's made of a single piece of durable, lightweight 2024 aluminum.
The ENVE Road Stem is a staple component in our line and often under-appreciated for the benefits it provides out on the road. The stem plays a key role by connecting your bike to your handlebars and it must manage all the forces that you put into your bike. On the road, the 100% uni-directional carbon body provides a lightweight structure that is torsionally and laterally stiff to ensure that inputs into steering and accelerating are positive and confidence-inspiring. Over rough roads, the carbon fiber laminate helps absorb vibration and reduce hand and upper body fatigue. To further reduce weight, all stem hardware is constructed from lightweight titanium. The faceplate is cold-forged aluminum that allows for a highly reliable and strong grip on the handlebar for responsive steering input with zero slipping. - Material: Carbon Fiber - Faceplate Material: Aluminum - Hardware Material: Titanium - Stack Height: 41mm - Torque Spec, Face Plate: 5.5Nm - Torque Spec, Steer Tube: 5.5Nm - Weight: 90g (80mm), 107g (90mm), 115g (100mm), 121g (110mm), 126g (120mm), 136g (130mm), 145g (140mm)
The forged alloy construction of the Bontrager Pro Blendr Stem delivers stiffness without compromising its light weight or sleek looks. Easy integration of lights, a computer, and more with the Blendr integration system make this stem a perfect upgrade for any bike. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Included Blendr accessories: Pro Mono Base, Trip Computer mount, and High Ion Light mount
$95.00 - $100.00
• 3D forged 2014 aluminum alloy with oversized box cross-section • Oversized 46mm wide 6061 alloy faceplate • Titanium hardware • ± 8° rise requires fewer spacers • 1-1/8" steerer adapter included • Weight: 145 grams (100mm)
The perfect fit The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer and more with Blendr accessory integration. Product details - Blendr Elite allows seamless accessory integration - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Approved for carbon bars and steerer tubes - Suitable for both MTB or road use - Includes Blendr mono base and accessory mounts
On today’s road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we’ve had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish
A Trail-Rated, carbon-bodied, 31.8mm stem for mountain bikers seeking best-in-class performance, response, and vibration absorption. The M6 stem is designed to complement the look and ride feel of the ENVE M5 and M6 handlebars. - Material: Carbon - Faceplate material: Aluminum - Hardware material: Titanium - Clamp Diameter: 31.8mm - Steerer Clamp Diameter: 1-1/8-inch - Torque Spec: 5.5Nm - Weight: 85g (40mm), 92g (55mm), 99g (70mm), 104g (85mm)
Thomson's Elite X2 Road Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X2 combines exceptional strength with light weight for a stiff stem and total control on all your rides. It has a two-bolt clamp design that's just as strong as four-bolt designs thanks to Thomson's interlocking interface and it also cuts down on the weight. Plus, the stem's low 36mm stack height gives you more options for customizing your position. And, thanks to their reversible graphics, your X2 looks great whether you run a positive or negative rise.
$14.99 - $19.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager XXX Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
Bontrager's SSR Stem is made of forged 6000 aluminum for awesome strength. The 2-bolt faceplate makes it super easy to install and distributes the clamping force on your bars. Plus the opposing bolts on the steerer clamp ensure safe and secure tightening. This stem can be flipped for a positive or negative rise.
Stiff and light with the cleanest accessory solutions available When all you need is the right position, the Elite stem gets it done and more. The strong and light alloy stem is your bike's best workhorse and also features Blendr accessory integration for a sleek setup. Key features - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Safe for use on carbon steerer tubes and handlebars - Includes one Blendr base to integrate Ion lights and Trip computers.
Tom Ritchey's original 4Axis stem changed stem design forever, and the WCS 4Axis Road Stem has all the original features updated to add a touch of class for your speed machine. It's made of forged 2014 aluminum for super light weight with excellent stiffness for optimum handling. Plus, it features Ritchey's Bias Clamp and 4-bolt faceplate, which make it super secure. It looks great, too.
The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility. - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer, and more with Blendr Elite accessory integration. - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Approved for carbon bars and steerer tubes - Includes one Blendr base to integrate Ion lights and Trip computers
FSA's K-Force OS-99 CSI is 3-D forged and CNC machined from AL2014 before a uni-directional (UD) carbon weave skin is applied through the Carbon Structural Integration (CSI) process. To further reduce weight the OS-99 uses a 4-bolt sculpted AL2014 alloy/carbon faceplate and titanium hardware. CSI is a process that permanently bonds carbon to alloy, to create a true hybrid product, with many of the benefits of aluminum and carbon. - Stack Height: 41mm - Weight: 126g (100mm)
Trim some weight and add some style to your ride with Bontrager's RXL Stem. Made from forged 7050-T6 aluminum, this stem is exceptionally light and strong. In fact, it's equally suited to the sharp impacts of mountain biking as it is to the long-mile rigors of the road. And, its shot-peened finish offers exceptional strength while the 4-bolt faceplate makes installation easy, and the opposed-bolt steerer clamp is carbon friendly.
Upgrade your ride with the gram-shaving EA90 stem from Easton. This ultra-light bar-holder sports Easton's 3D forged aluminum to provide a great balance of low weight, high strength and stiffness for excellent steering control in all conditions. Easton's Top-Lock technology locks the stem and faceplate together, allowing for a highly rigid interface while minimizing loads on the bolts so the EA90 is perfectly safe for carbon bars.
Comfort is king when you dial in your riding position with Profile's Boa Quill Stem. This light and durable welded-aluminum stem features a 20- or 40-degree rise and a secure two-bolt faceplate that makes installing the handlebars a breeze.
A little H2O is a crucial part of every ride! This sweet stem is made of 6061-T6 aluminum for a light, strong ride. Cold 3D forging adds strength and a nice finish.
The smarter upgrade Outfit your road bike with the Pro Blendr stem to provide confident handling and integrated accessory capability. The forged alloy construction means you'll get the stiffness you demand but in a weight that'll make others jealous. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - Blendr technology seamlessly integrates accessories with included Blendr Pro base and Blendr XXX accessory mounts - Blendr XXX mounts include Bontrager Ion and Trip, Garmin, GoPro and SRM accessories - Countersunk, corrosion-resistant steel bolts do not require washers - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem
Page 1 of 2 Next page