Headsets

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: IS47/33/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 47.0mm • Crown Race Seat Dia.: 33mm • Crown Race Type: Aluminum, Seal • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Weight: 38.47g

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 26 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC30 • S.H.I.S Upper: EC30 • S.H.I.S. Stem Clamp Diameter: 25.4 • Upper Stack Height: 18 mm • Weight: 163 g

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability, and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with straight steerer 1-1/8" forks - Bearing Type: Cartridge - Color: Black - Defined Color: Black - Weight: 171 g -Upper Stack Height: 8 mm - Lower Stack Height: 12 mm - Crown Race: 30 - S.H.I.S Lower: EC44 - S.H.I.S Upper: ZS44 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. Stainless Steel Bearings provide unparalleled corrosion resistance Highly recommended if your headset will be exposed to wet conditions or sweat Lifetime warranty

Wolf Tooth Precision Headsets for Trek Knock Block are machined in the USA out of aircraft grade aluminum with superior sealing for protection against the elements. Available in a variety of colors to add some style to your bike. These upper headsets are for Trek frames with molded-in internal bearing cups. - Designed to work with Trek's Knock Block system - The top cap on these headsets have unique raised features that key to Knock Block compatible stems (made by Bontrager - If spacers are needed, you will need to use special Knock Block compatible spacers with notch features - This product is the upper headset only - Lower headsets on bikes with Knock Block do not have any unique features. They are usually IS headsets which are available separately

The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary, made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 7 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 44mm headtube.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS56/30/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 88g

Cannondale Headshok/Lefty Bearing

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 37g

FSA Standard Headset Bearings

This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

FSA Orbit MX threadless headset features TH brand 36-degree angular contact sealed bearings. - Forged and CNC machined 6061/T6 aluminum cups - Patented alignment tip for increased durability and performance - TH Brand 36-degree Angular Contact sealed bearings - 7075 alloy crown race - Laser etched aluminum top cap - EC34/28.6 (36x36) | EC34/30 (36x36)

-Overdrive tapered MTB headset (2009-2016)

Cane Creek 40 EC Headset Lowers - Compatible with tapered 1-1/8" to 1-1/4" steerer tubes - Bearing Type: Cartridge - Color: Black - Lower Stack Height: 12 mm - Weight: 65 g - Crown Race: 33 - S.H.I.S Lower: EC44

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 26 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC30 • S.H.I.S Upper: EC30 • S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill • Upper Stack Height: 22 mm • Weight: 205 g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS49/28.6/H8/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 49.61mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 57g

ABI Headset Bearing for new builds or replacements.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!

The Ritchey Logic Threaded Headset is your go-to headset for threaded steerers. Featuring a smaller upper bearing to save weight, the Logic Threaded headset also features lightweight, precision-machined aluminum cups that are deeper for more confident insertion. - Smaller upper bearing to save weight - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion - Material: CrMo/Plastic - Upper Fit (S.H.I.S.): EC34/28.6 - Lower Fit (S.H.I.S.): EC34/30 - Bearing: Ball bearing

Converts quill style forks to use threadless stems.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/K|IS42/30/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 72g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

• Aluminum • Semi-sealed mechanism • 1 1/8 inch • S.H.I.S.: EC34/28.6, EC34/30

Wolf Tooth Premium headsets feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. - Stainless Steel Bearings provide unparalleled corrosion resistance - Highly recommended if your headset will be exposed to wet conditions or sweat - Lifetime warranty - Lower Bearing, includes race

ABI Headset Bearing for new builds or replacements.

-1-1/4" headset spacer kit with following sizes: 2.5mm(x1) .5mm(x2) 10mm(x2)

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction

This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!