$31.50 - $47.25
Kevlar reinforced (black) hydraulic tubing: DOT-3/4/5.1 compatible - Prime Series kits are for Prime Pro, and Prime Expert brakes only - Stroker Ace/Gram/Carbon/Trail and El Camino kit includes specific fittings for lever and caliper (not for Stroker Ryyd - HFX-Mag/G2 kit includes a pre-crimped inline caliper fitting and specific HFX-Mag lever attachment (can be used with older G1 caliper if angle warrants fit) - HFX-9 kit includes a pre-crimped inline caliper fitting with specific HFX-9 lever attachment - Sole and Stroker Ryde kit includes specific fittings for lever and caliper - Tubing parts that fit HFX-Mag also fit Original, DH, FR, and Comp systems
$37.00 - $40.00
SRAM's SlickWire MTB Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent stainless-steel cables, slippery lined 5mm-diameter housings, aluminum ferrules and frame protectors.
$13.99 - $14.99
Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.
$21.99 - $25.99
Jagwire's Universal Sport Brake Cable Kits are the perfect way to enhance your braking performance while adding a little style to your bike, too. Compatible with both mountain and road brakes, the slick stainless cables provide smooth, powerful braking. And with the housing and all the needed parts included, these cable kits are easy to install and ready to deliver years of smooth positive braking.
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.
$10.99 - $12.99
Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. The Aluminum model accepts lines up to 5mm in diameter and the lines snap in. The Stainless model grips fully around the lines and is adjustable to fit most diameters.
$21.99 - $25.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
This aluminum link housing is the ultimate combination of durability and attention grabbing looks. It's designed to enhance your performance and appearance. So, why is it better than traditional housing? It's compressionless, which means better braking performance with enhanced modulation. But its flexibility allows for tight bends without kinking. It's also much lighter than traditional coiled steel housing while being more durable. Combine these benefits with Jagwire's Elite, ultra-slick polished cables and Slick-Lube liners that dramatically reduce friction and you've got the best of performance and style. - Compressionless link housing gives crisp brake lever feel with extreme flexibility - Each kit comes with links pre-installed on housing segments making setup quick and simple - 50% lighter than traditional coiled steel brake housings; 30% lighter than Kevlar brake housings - Durable, ultra-slick polished inner cables minimize system friction - Aluminum housing won't kink or rust. - 20th Anniversary Limited Edition Black kit (RCK705) has black link segments; the kit includes 6 additional accent links of each color including gold, silver, red, and blue
Road Pro Brake kits offer enhanced performance and style. Designed to work with and match Jagwire's Pro Shift kits, the Pro polished brake cables combined with their Slick-Lube liners dramatically reduce friction while Kevlar reinforced, compressionless brake housing delivers smooth, powerful braking performance. And with all needed parts included, Jagwire's Road Pro Brake kits are easy to install. - Pro level polished cables combined with Slick-Lube, Kevlar reinforced housing enhance braking performance - All parts needed for a complete brake cable and housing install on road bikes are included - Kits provide longer housing and cables for large frame with full housing or mechanical disc brakes
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1
$5.99 - $7.00
Stainless steel cables are extruded to provide a smooth low-friction surface.
$44.99 - $48.99
Jagwire's Road Pro Complete Cable Kit is the perfect way to upgrade your shifting and braking while adding some style to your bike, too, since it comes in many colors. The kit provides everything needed to replace your Shimano or SRAM shift and brake cables including Jagwire's super-smooth Teflon-coated cables and compression-resistant Kevlar-reinforced housing for dramatically improved performance. Plus, with all the small parts included in the kit it's easy to install.
$29.99 - $64.99
Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.
$18.99 - $21.99
Jagwire's Cable Guide Stoppers are rubber adapters that fit over hydraulic brake lines so that the lines will fit into various open-type frame cable-housing stops and stay securely in place. You get a pack of 50.
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.
- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables. - 5mm ID for use with most braking cables. - 50-count bottle
$11.99 - $15.99
Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification
$25.99 - $39.99
Innovative Elite Ultra-Slick derailleur cables offer top end performance without the problems associated with coated cables. These cables are a great fit for bikes with full cable housing and modern drivetrains. - Diameter: 1.5mm - Double-ended: No - Highly polished, ultra-slick uncoated surface delivers incredibly accurate, smooth responses - Compatible with all performance housing and lubricants - Uncoated surface means there's nothing to flake off during installation or riding, so it delivers the most durable, consistent performance - Stainless steel wires are corrosion resistant
$6.00 - $9.00
Stainless steel cables are extruded to provide a smooth low-friction surface.
Rejuvenate the performance of your brakes with this convenient and valuable kit that includes all parts needed for installation. - This convenient and valuable kit is the key to restoring your brake's performance - Compatible with nearly all braking systems - Stainless steel cables are 2300mm and 1700mm long, for front and rear brakes - Compressionless housing comes pre-lubed is 3000mm long - Kit includes Comp brake ferrules, cable frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched
Elegant style meets incredible weight savings with the XXX Cable and Housing set. It's time to take your road machine to the next level. Linked alloy housing is up to 40% lighter than traditional alternatives, while also being more flexible and incredibly smooth for class-leading performance. Product details - This lightweight, flexible, and elegant kit is perfect for the demanding rider - Compatible with Shimano and SRAM drivetrains - Ultra-low-friction cables are both 2300mm long, for front and rear shifting - XXX housing features Pro lube and is lighter, more flexible, and stiffer than standard - Kit includes XXX shift ferrules, Pro Inline Cable Tension Adjuster, frame protectors, and cable end caps - For installation instructions, visit: trekbikes.com/manuals - Included stainless steel cables are rust-proof and come pre-stretched
Upgrade the performance of your drivetrain with this convenient kit that includes all parts needed for smooth and reliable performance. - This smooth and reliable kit is a great performance upgrade for your bike; - Compatible with Shimano and SRAM drivetrains - Low-friction cables are both 2300mm long, for front and rear shifting - Black compressionless housing comes pre-lubed is 3200mm long - Kit includes shift ferrules, frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched
Step up to premium performance of your drivetrain with this upgraded kit that includes all parts needed for incredibly smooth performance. - This premium kit is for the performance rider looking for incredibly smooth shifting - Compatible with Shimano and SRAM drivetrains - Ultra-low-friction cables are both 2300mm long, for front and rear shifting - Black compressionless housing includes low-friction Pro lube and is 3200mm long - Kit includes low-friction Pro shift ferrules, frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched
Rejuvenate the performance of your drivetrain with this convenient and valuable kit that includes all parts needed for installation. - This convenient and valuable kit is the key to restoring your shifting performance - Compatible with Shimano and SRAM drivetrains - Stainless steel cables are each 2300mm long, for front and rear shifting - Compressionless housing comes pre-lubed is 3200mm long - Kit includes Comp shift ferrules, cable frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched
$10.99 - $88.99
Jagwire's Tube Tops are installed over your cable housing sections to provide a soft bumper to deaden the impact of cables hitting your frame while riding, minimizing rattles and protecting your frame's fine finish. They feature a split seam so they're easy to install by hand with no cable disassembly required. Just open the Tube Top's seam, put it on the housing where it's rubbing the frame, rotate the seam so it faces out and release. The Tube Top will stay in place and keep your bike quiet and safe.
Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2 Double Ended: No Length: 3000 mm Quantity Included: 1
- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables - 5mm ID for use with most braking cables - 100-count bottle
- Aluminum cable crimps to prevent frayed cables - 1.2mm for shift cables or 1.6mm for brake cables - Silver aluminum - 250-count bottle
Jagwire's Straddle Cable Carrier is for cantilever and centerpull brakes. It attaches to the end of the brake cable and is what the brake's straddle (also called transverse or crossover) cable attaches to. The Straddle Cable Carrier is made of light, corrosion-resistant and durable aluminum with a steel bolt. You get a pack of 10.
Jagwire's Aluminum Housing Connectors allow joining two sections of the same-size cable housings together in case you only have shorter sections and you need to make a longer one. It comes in 4, 4.5 and 5mm diameter. Match the diameter of the housing sections on your bike.
Page 1 of 3 Next page